Heavy Duty Gates:
Made in even lengths from 4′ to 20′. Built out of 1-5/8″ pipe with sleeve hinges and 3″x4″x3/8″ flat hinge plates. Comes with 3′ chain and grab hook. We stock 6 rail gates, approximately 49″ tall, but can make 5 or 7 rail gates if your application requires a taller or shorter gate.
Continuous Fence Panels:
1-1/4″ x 20′ – 6 Rail Panels – 48″ Tall – Uprights are 1-1/4″ x 3/16″ Flat Bar. Comes with connecting rods. Can make 5 or 7 rail if you need them taller or shorter.
Heavy Duty H-Braces:
Made out of good used oilfield tubing and casing. 8′ Posts with caps welded on and 1 – 8′ cross brace. Sizes are post size first and cross brace second.
2 7/8″ x 2 7/8″ • 3 1/2″ x 2 3/8″ • 4 1/2″ x 2 7/8″ • 4 1/2″ x 4 1/2″
Sheffield Wire Products:
6′ and 6-1/2′ x 1.33# Sheffield T-Posts, 12 1/2ga 2 point, 4 point and Barbless Wire. Rolls of Field Fence and 2″x4″ Non-Climb Horse Fence. 500′ rolls – 7 Strand Cable, Fence Stays, Electric Fence Wire and more.
Stay Tuff Products:
Clamp Bars, Wire Pullers, Stretcher Bar & Wedges, Crimp Sleeves, Ultra Crimp Tools, Gripples, Gripple Tensioning Tools, 11ga Drill Chucks, 2 3/8″ through 4 1/2″ Post Clips and T-Post Clips. We don’t stock Stay Tuff wire products but can special order upon request.
Much More:
Fencing Hardware, Tools for Fencing, Pipe Guides, Hinges, Latches, Fence Springs, Turnbuckles, Clamps, Cable Grips, Cable Pulling Grippers, Cut & Weld Supplies, Abrasives, Cargo Control, Safety Products etc. We try to stock a multitude of materials needed by Farmers, Ranchers & Welders for Livestock Fencing.
Visits: 31571 |